INCLINE 5 6 6 6 7 5 8 8 5 3
P11 SPEED 3 4 5 9 5 9 5 5 6 3
INCLINE 3 6 5 3 5 3 5 5 4 2
P12 SPEED 1 2 3 10 7 7 10 5 4 3
INCLINE 2 5 5 3 5 5 3 3 6 2
P13 SPEED 1 1 3 5 5 5 9 3 1 1
INCLINE 5 5 8 8 8 3 3 7 8 0
P14 SPEED 3 4 7 3 4 6 3 4 5 3
INCLINE 2 4 4 4 4 2 3 3 1 0
P15 SPEED 2 3 5 5 7 7 7 6 4 3
INCLINE 3 3 5 5 5 5 2 2 1 0
SELF-DEFINE PROGRAM
Besides 15 inner installed programs, there are 3 user self-define programs: U1, U2, and U3.
1. User self-define program setting:
In the initial situation, press “ program” continuously till U1,U2,U3, and the “ time ” window glitter, show
the time 10:00, press “ incline+”, “ incline-”, “speed+”, “speed-” to set the running time; press “mode” to
set program data, set the first interval time, press “speed+”, “speed-” or press speed shortcut button to
set the speed; press “incline+”, “incline-” or incline shortcut button to set the incline; then press “mode”
button to finish the first interval time and enter into the second interval time, until finish 10 interval time.
The data will be kept till the next setting; the data will not lose for power off.
2. User self-defines program starting:
When the machine is waiting for operation, press the “program” button continuously till U1, U2, and U3,
set the running time then press “start” to start the machine.
3. User self-define program instruction:
Each program will be divided into 10 time section, set the speed and incline in each interval time, then
press “start” to run the machine.
RANGE OF SPECIFICATION:
Initial Initial Data Set Range Display Range
TIME(MIN:SECOND) 0:00 10:00 5:00-99:00 0:00
－
99:59
SPEED(K/h) 0.00 0.8 0.8-18 0.8-18
INCLINE(LEVEL) 0 0 0-18 0-18
DISTANCE(KM) 0.00 1.00 0.50-99.9 0.00
－
99.9
PULSE(HYPO/MIN) P N/A N/A 50-200
CALORIE(THERM) 0 50 10-999 0
－
999
BODY TESTER:
At the beginning state, press “ PROGRAM” Continuously entering FAT body fat tester, press “ MODE “
enter F-1
、
F-2
、
F-3
、
F-4
、
F-5 ( F-1 SEX, F-2 AGE, F-3 HEIGHT, F-4 WEIGHT, F-5 FAT TESTER ),
Press “SPEED+”
、
“SPEED -” to set F-1 – F4 ( refer to the following chart), after that, press “ MODE” to
set F-5, grasp the hand pulse, the window will display your body quality index after 3 seconds. The
body quality index is to test the relation between height and weight. The body FAT suits for any male
and female, to adjust the weight according it together with other body quality index. The idea FAT
should be 20-25, if under 19, it means too thin. If between 25 and 29, it means overweight, if over 30, it
To Next Page
Loading...
