Freenove 4WD Smart Car Board for Raspberry Pi - Page 87

Need support?  support.freenove.com
83
Chapter 3 Module test (necessary)
█ www.freenove.com
Step 2
The Blue side of cable should be toward to RPi USB port.
Connect another end of cable to Raspberry Pi. Please note the front and back of the cable.
Run program
Detect camera:
vcgencmd get_camera
1. execute the cd command:
cd ~/Freenove_4WD_Smart_Car_Kit_for_Raspberry_Pi/Code/Server
2. Execute the following command:
python camera.py
Then please open and check the generated image.jpg under
/Freenove_4WD_Smart_Car_Kit_for_Raspberry_Pi/Code/Server.
×
√