To Next PageTo Next Page
Need help?Do you have a question about the Fresenius Kabi agilia and is the answer not in the manual?
General| Brand | Fresenius Kabi |
|---|---|
| Model | Agilia |
| Accuracy | ± 2% |
| Flow Rate Range | 0.1 to 1200 ml/h |
| Power Supply | AC/DC |
| Alarms | Occlusion, low battery |
| Flow Rate Accuracy | ±2% |
| Occlusion Pressure | Adjustable |
| Volume Range | 0.1 to 9999 ml |
These Instructions For Use (IFU) are applicable to the Drop Sensor accessory.
The Drop Sensor is intended to detect drops in the administration set drip chamber.
The Drop Sensor is intended for use by qualified healthcare professionals.
The Drop Sensor is intended for use on the same population as compatible Volumetric infusion pumps.
The Drop Sensor is intended for use in healthcare environments.
Use ONLY Volumetric infusion pumps from Fresenius Kabi with the Drop Sensor.
Thoroughly clean and disinfect the Drop Sensor after each patient use, before maintenance, or if contaminated.
Use recommended agents like Didecyldimethylammonium chloride for cleaning and disinfecting.
Follow specific protocols for cleaning and disinfecting the Drop Sensor to ensure effectiveness and safety.
