What to do if Fresenius Kabi Medical Equipment pump is damaged, noisy, smoking or with an abnormally hot part?
If your Fresenius Kabi medical equipment pump shows signs of damage, becomes noisy, emits smoke, or has an unusually hot component, immediately remove the holder power cord, stop using the device, and get in touch with your biomedical department or Fresenius Kabi After-Sales Service right away.
What to do if Fresenius Kabi Ambix activ Medical Equipment pump has been dropped?
If the Fresenius Kabi medical equipment pump has been dropped, do not use the device and contact your biomedical department or Fresenius Kabi After-Sales Service.
What to do if Fresenius Kabi Medical Equipment pump does not start after switched ON?
If your Fresenius Kabi medical equipment pump fails to start after being switched on, connect the pump to the mains supply to charge the battery. If the problem persists, contact your biomedical department or Fresenius Kabi After-Sales Service.
Why does Fresenius Kabi Ambix activ Medical Equipment device switch off when it is disconnected from the mains?
The Fresenius Kabi medical equipment device may switch off when disconnected from the mains because the battery is completely discharged. Charge the battery. If problem remains, contact your biomedical department or Fresenius Kabi After-Sales Service.
Why does Fresenius Kabi Ambix activ Medical Equipment device switch off on its own?
If the Fresenius Kabi medical equipment device switches off on its own, connect the pump to the mains supply. If the problem continues, contact your biomedical department or Fresenius Kabi After-Sales Service.
What to do if the Power Indicator LED does not light up on Fresenius Kabi Ambix activ?
If the Power Indicator LED on your Fresenius Kabi medical equipment does not light up, connect the holder to the mains supply. If the issue persists, contact your biomedical department or Fresenius Kabi After-Sales Service.
How to troubleshoot flow rate variance higher than flow rate accuracy on Fresenius Kabi Ambix activ?
To address flow rate variance exceeding accuracy on your Fresenius Kabi medical equipment, check the set configuration, fluid viscosity and temperature, and ensure the fluid is within normal temperature conditions. If the problem continues, contact your biomedical department or Fresenius Kabi After-Sales Service.
What to do for front panel problems (keys, backlight) on Fresenius Kabi Ambix activ?
If you are experiencing front panel issues such as problems with the keys or backlight on your Fresenius Kabi medical equipment, check the general state of the front panel. Then, plug the pump into the mains and check the backlight. If the problem persists, contact your biomedical department or Fresenius Kabi After-Sales Service.
Why battery alarm when pump has been correctly charged in Fresenius Kabi Medical Equipment?
If you receive a battery alarm on your Fresenius Kabi medical equipment even after the pump has been correctly charged, verify the mains supply voltage. If the problem continues, contact your biomedical department or Fresenius Kabi After-Sales Service.
How to fix unstable Fresenius Kabi Ambix activ Medical Equipment pump?
To stabilize an unstable Fresenius Kabi medical equipment pump, check that the clamp handle of the holder is fastened.
General| Device Category | Infusion Pump |
|---|---|
| Manufacturer | Fresenius Kabi |
| Model | Ambix activ |
| Type | Volumetric Infusion Pump |
| Accuracy | ±5% |
| Infusion Modes | Continuous, Intermittent, PCA |
| Volume Range | 0.1 to 9999 mL |
| Power Supply | AC Power, Rechargeable Battery |
| Display | LCD |
| Alarms | Occlusion, Air-in-line, Low battery |
| Compatibility | Standard infusion sets |
Defines the primary purpose and medical therapies for the Ambix activ pump.
Lists suitable therapies and specifies what the pump should not be used for.
Covers intended user profile and environmental operating conditions.
Identifies pump parts, holder, and data/nurse call connections.
Details required disposable sets and optional accessories like backpacks.
Covers pump power supply, charging, and battery life.
Step-by-step guide for installing and detaching the infusion set.
Explains switching on/off, starting, stopping, priming, and alarms.
Details setting up Continuous, Volume/Time, Intermittent, and Ramp modes.
Covers parameter menus, KVO rate, sensitivity, and backlight settings.
Describes the pump's internal time keeper and event recording.
Explains how to access and manage the stored event history.
Details alarm priorities, meanings, and operating conditions.
Provides solutions for common pump issues and error descriptions.
Explains safety mechanisms like air infusion and volume limits.
Lists physical specs, electrical, and environmental conditions.
Defines occlusion detection thresholds and timings.
Presents graphical data on flow rate accuracy and variations over time.
Summarizes cumulative flow rate accuracy and pressure effects.
Defines critical pump functions under electromagnetic conditions.
Guidance on avoiding and mitigating electromagnetic interference.
Details the coverage and conditions of the pump's warranty.
Specifies recommended maintenance intervals and procedures.
Step-by-step guide for cleaning the pump and accessories.
Instructions for disinfecting the pump and accessories.
To Next Page
