Fri-Jado STG - Optional Settings for the STG 5 and STG 7

888180 88880030
888 85 88880000
888 85 88880000
888000 88880040
888195 88880046
888p01 88881055
Service Manual STG5/7 STW5/7 form 9123659 rev. 03/2014 Page 9
PROGRAMMING INSTRUCTIONS
Press Temperature Hold
process key
Temperature Hold sym-
bol lights up
Press and hold the Tem-
perature key
Press Up or Down key
Press Start / Stop key
On indicator lights up
Press Rotor key to start
turning the rotor
Press Rotor key again to
stop
Load the rotisserie with
products
SECOND COOKING STEP (TEMP.) TEMPERATURE HOLD
Press and hold Tempera-
ture key
Press Up or Down key
LOADING PROGRAM
Press program number
to load pre-set values
PROGRAM START & LOADING
INTERRUPTING ACTIVE PROGRAM
Press Rotor key
Heaters and front lamp
switch off
Rotor stops
On indicator is blinking
Process time in hold
OPTIONAL SETTINGS FOR THE STG 5 AND STG 7
SET ADDITIONAL BUZZER SIGNAL
Select a pre-defined
program
Press and hold Buzzer
key
Press Down key