_ SLEEP; This button is used to
start or stop the sleep function
and/or to start the block function.
Also, press this button once and
the unit starts operating in sleep
mode which keeps the room
temperature comfortable and
helps in the consumption of
energy. To start the block function
press this button for 3 seconds;
and it will start leaving the
configuration and it won't accept
in operation except for the present
block function.
_ TIMER: Is used to select the
turning on time and turning off
time of the air conditioner.
_ CANCEL:
1. If the timer is TIMER ON/TIMER
OFF and the function has been
configured, press "cancel" and
it will cancel the timer program
and turn off the unit.
2. If the timer is "TIMER OFF"
only mode, press the button
"Cancel" and it will cancel the
timer program and turn the unit
off.
Note: This function, works only
when some function of timer is
activated, tn the contrary, nothing
will happen when the button is
pressed.
LED (screen): Press this button
to erase the digits that are shown
in the screen of the air conditioner.
Press again to activate,
@
To Next Page
Loading...
