Manual operation (without remote control)
Manual operation can be used
temporarily in case you can not find
the remote controller or its batteries
are exhausted.
!. Open and lift the front panel up to
an angle until it remains fixed with
a clicking sound,
2. One press of the manual control
button will lead to the forced
AUTO operation.
3. Close the panel firmly to its
original position.
Attention
Once you push the manual button,
the operation mode is shifted in an
order as: AUTO, COOL, OFE
Push the button twice, the unit will
operate in forced COOL mode. This is
used for testing purposes only.
Third press will stop the operation and
turn off the air conditioner operation.
To restore the remote controller
operation, use the remote controller
directly.
@
Manual control
button /
Auto/Cool@
To Next Page
Loading...
