vacuum cleaner or water, After, dry
for a couple of hours or until dry.
7. Insert the fresh air filter in its original
place.
8. insert the high part of the air filter
(fresh air filter + Support frame)
again in the unit keeping in mind
that the outside border (right and
left) are lined up correctly, now
place the whole filter in the initial
position,
Support
Fresh frame
air filte_
Fresh
air filter
Fig.1 Fig.2
Support
frame
Fresh _\
air flits
Fig.3 - "\\ _"_
Suppo_
frame
Maintenance
If you plan to idle the unit for a long time, perform the following:
1. Operate the fan for about half a day to dry the inside of the unit.
2. Stop the air conditioner and disconnect power. Remove the batteries from
the remote controller.
3. The outdoor unit requires periodic maintenance and cleaning. Do not
attempt to do this yourself. Contact your dealer or servicer.
Checks before operation
1. Check that the wiring is not broken off or disconnected.
2, Check that the air filter is installed
3. Check if the air outlet or inlet is blocked after the air conditioner has not
been used for a long time.
To Next Page
Loading...
