Apeculiarsmellcomesoutfromtheindoorunit.
Thisiscausedbytheindoorunitgivingoffsmellspermeatedfrombuilding
material,fromfurniture,orsmoke.
TheairconditionerturnstoFANonlymodefromCOOLorHEAT(For
coolingandheatingmodelsonly)mode.
Whenindoortemperaturereachesthetemperaturesettingonairconditioner,the
compressorwillstopautomatically,andtheairconditionerturnstoFANonly
mode.Thecompressorwillstartagainwhentheindoortemperatureriseson
COOLmodeorfallsonHEATmode(Forcoolingandheatingmodelsoly)tothe
setpoint.
Drippingwatermaygenerateonthesurfaceoftheindoorunitwhencoolingina
highrelativelyhumidity(relativehumidityhigherthan80%).Adjustthehorizontal
louvertothemaximumairoutletpositionandselectHIGHfanspeed.
Heatingmode(Forcoolingandheatingmodelsonly)
Theairconditionerdrawsinheatfromtheoutdoorunitandreleasesitviathe
indoorunitduringheatingoperation.Whentheoutdoortemperaturefalls,heat
drawninbytheairconditionerdecreasesaccordingly.Atthesametime,heat
loadingoftheairconditionerincreasesduetolargerdifferencebetweenindoor
andoutdoortemperature.Ifa comfortable temperature can't be achieved by the
air conditioner, we suggest you use a supplementary heating device.
Auto-restart function
Power failure during operation will stop the unit completely.
For the unit without Auto-restart feature, when the power restores, the
OPERATION indicator on the indoor unit starts flashing. To restart the operation,
push the ON/OFF button on the remote controller. For the unit with Auto-restart
feature, when the power restores, the unit restarts automatically with all the
previous settings preserved by the memory function.
Lightning or a car wireless telephone operating nearby may cause the unit
to malfunction.
Disconnect the unit with power and then re-connect the unit with power again.
Push the ON/OFF button on the remote controller to restart operation.
To Next Page
Loading...
