119
ERROR CODE TABLE - FFLE3911QW and FFLG4033QW - (ELECTRIC and GAS DRYER)
S.No Error Code Fault Condition Page No
1 E31 Moisture Sensors (for models with moisture bars only) 121
2 E41 Door Open 122
ERROR CODE TABLE - FFLE3911QW and FFLG4033QW - (ELECTRIC and GAS DRYER)
S.No Error Code Fault Condition Page No
3 E51
Motor Relay/Thermal Limiter/Locked Rotor/Motor Centrifugal-Switch 1/
Harness/Low Power Supply
123
4 E52 Motor Relay 125
5 E53 Motor Fault-- Motor Stopped in the middle of a cycle 126
6 E54 Centrifugal Switch 2/ Heater/Thermal Limiter-2/Wiring 127
7 E55 Motor Sensing failure on Main Board/ Heater/Thermal Limiter-2/Wiring 128
8 E56 Belt 128
9 E61 Heater Relay Failure 129
10 E62 Heating Timeout 130
11 E65 High Limit Thermostat trip count too high 131
NOTE
1. 1E followed by the numbers mean that it is the first error code recorded. Similarly 2E followed by the numbers
mean that it is the second error code recorded and so forth.
2. 1E through 5E— followed by two zeroes (1E->00, 2E->00... and others.. for models with digital-display) and
No Flashing LED, and No Beeper means, no failure detected/none recorded.
To Next Page
Loading...
Need help?
General
