EN
FRIGOMAT GX4Kompact, GX6, GX8 M04.42026 R.2019.05.30 1
KEY
User informations
Technical informations
Warning: information that, if correctly followed, avoids risks
to people, the machine and the product.
Warning: information that, if correctly followed, avoids risks
to the machine and the product.
Suggestion: information to follow for optimal machine opera-
tion and product quality.
We congratulate you for having chosen to purchase a FRIGOMAT machi-
ne.
This machine is designed and built to guarantee maximum performance
and reliability.
This manual, supplied together with the machine, must be considered an
integral and essential part and must be delivered to the final user.
Before carrying out any operations, we recommend studying these instruc-
tions carefully because only by reading them carefully can you obtain the
maximum performance from your machine.
The following pages carry all of the indications required to perform installa-
tion, operation, adjustments and maintenance correctly.
Keep this manual carefully for further use and provide it to the technician
in case of intervention on the machine.
The machine is covered by warranty according to the terms illustrated in
the "WARRANTY CARD" supplied. It must be duly filled in and returned to:
FRIGOMAT S.r.l., via 1° Maggio, 28
26862 GUARDAMIGLIO (LODI) – ITALIA
Please write the serial number of your machine in the field below.
Please affix the dealer’s stamp in the field below
The manifacturer reserves the right to carry out the modifications it deems necessary
to improve its product or the technical manual without prior warning, inserting the
variations in the subsequent editions.
Only instructions originating from the factory or its authorized translation representati-
ve(s) are considered to be the original set of instructions.
Total or partial reproduction, adaptation or translations of this manual without prior
written consent by the manifacturer is prohibited.
Index
KEY 1
Index 1
I MACHINE DESCRIPTION
1 GENERAL SAFETY STANDARDS 2
2 USE 2
3 WORKING LIMITS 2
4 MARKING AND GRAPHIC SIGNS 2
5 SAFETY DEVICES 3
II TRANSPORT AND INSTALLATION
1 PRELIMINARY INSPECTION 4
2 STORAGE 4
3 INSTALLATION PLACE, POSITIONING 4
4 INSTALLATION 4
5 OPERATING CHECKS 5
III USE
1 PREPARATION FOR USE 6
2 PRELIMINARY CHECKS 6
3 ICE CREAM PRODUCTION 6
4 OPERATIONAL ROUTINES 8
IV CLEANING AND MAINTENANCE
1 CLEANING 10
2 CHECKLIST CLEANING AND SANITATION 11
3 MAINTENANCE 12
4 FAILURES IDENTIFICATION 14
V PROGRAMMING
1 RESET
2 PROGRAMMING
VI EXTRAORDINARY MAINTENANCE
1 EXTRAORDINARY MAINTENANCE 18
2 LONG WORKING INTERRUPTION 18
3 DECOMMISSIONING 18
VII APPENDICES
DATA SHEETS ii
TAV. 01 - 25 v
VIII WARRANTY
WARRANTY xxx
To Next Page
Loading...
