Configuring Guest Access on the LAN 4 Port
FRITZ!Box 7490 159
3. Assign a name for the guest wireless network (SSID) and
enter a network key under “Security”.
This concludes the setup of your guest access. Now guests
can register their wireless devices with the FRITZ!Box.
Registering a Wireless Device with the Wireless Guest Access
1. Your guest starts the wireless LAN software of her or his
wireless device and searches for the guest network.
2. Your guests authorizes themselves using the network
key you assigned.
The wireless LAN connection will be established.
23.3 Configuring Guest Access on the LAN 4 Port
For guests you can configure the network port “LAN 4” as a
guest access.
Features of the LAN Guest Access
• Guests can connect their laptops to the guest access
with a network cable.
• Guest devices can surf the Internet.
• Guest devices have no access to the home network.
• The access profile “Guest” is set for the LAN guest ac-
cess. This access profile can be edited in the “Internet /
Filter” menu on the “Access Profiles” tab.
Configuring Guest Access
Set up the guest access as follows:
1. Open the FRITZ!Box user interface, see page 32.
2. In the “Home Network / Network” menu, select the “Net-
work Settings” page.
3. In the “Guest Access” area, check the box in front of the
“Guest access enabled for LAN4” option.
4. Click “Apply”.
To Next Page
Loading...
Need help?
General
