FROMM
SERVICE MANUAL FS360_EN01 Version00.doc
For further updates, see our website www.fromm-stretch.com and Login!
It is forbidden to duplicate this manual or parts thereof or any other form without the author’s authorisation © 2018
We would like to again highlight how all safety devices have been installed for operator safety,
etc. and must not be manipulated or excluded from the operations.
Refer to the drawings below and to the notes applied.
This mobile anti-crushing device works with the aid of mechanical
sensors.
Each time a foreign body touches the underside of the carriage,
carriage stop immediately and simultaneously sends a signal to the
turntable to stop in phase.
This safety device works with the aid of a photocell and a reflector.
Each time a foreign body gets between the photocell and the
reflector, a signal is sent to the turntable to immediately stop.
This mechanical safety device, parachute system, functions
whenever the belt is not tensioned, in other words it stops the
carriage from falling.
To Next Page
Loading...
