SERVICE MANUAL FS360_EN01 Version00.doc
FROMM
For further updates, see our website www.fromm-stretch.com and Login!
It is forbidden to duplicate this manual or parts thereof or any other form without the author’s authorisation © 2018
Reactivation button.
Reactivation power in the wrapping machine.
Pressing reactivation button one time, the machine will do an continue beep
simultaneously with an continue flash on the buzzer.
When an error involving a Stop occurs, once it has been removed the cause that
has generated the error, it is necessary press the Reactivation button to restore
the power in the panel.
Warning light / Buzzer.
This Warning Light / Buzzer signals the beginning of the execution of an automatic
cycle, the start of the turntable in manual mode, the start of the procedure for
resetting the positions and any errors.
Bottom wraps.
Potentiometer with display for adjustment of number bottom wraps.
(Adjustment 0 to 5, step 1).
Top wraps.
Potentiometer with display for adjustment of number top wraps.
(Adjustment 0 to 5, step 1).
Automatic / Manual selector (explanation of the program in “Start Cycle”)
Automatic wrapping up/down;
Automatic wrapping only up with carriage auto return t the end of the cycle;
Manual wrapping.
To Next Page
Loading...
