Fromm FS360 Series - Alarm E7: Belt Tension; Belt Tension Error Identification and Resolution

SERVICE MANUAL FS360_EN01 Version00.doc FROMM
For further updates, see our website www.fromm-stretch.com and Login!
It is forbidden to duplicate this manual or parts thereof or any other form without the author’s authorisation © 2018
43
ALARMS
E7: Belt tension 7x beep / warning light (repeated sequence)
This situation happens if the belt of the carriage is not tensioned.
In the first installation, it can be caused by the oscillations during
the transport of the machine.
To solve the error:
Step 1
Keep the belt under
tension manually
(pulling it towards
you).
Step 2
While holding the belt in
tension, press one time the
reactivation button (R).
Step 3
While holding the belt in
tension, choose:
 selector manual
movement;
 manual movement up.