Fromm P331 M - 1.3 Conversion Parts; 1.3.1 Conversion Parts for Changing Strap Width and Thickness; 1.3.2 Conversion Parts from Semi-Automatic to Automatic

1-6
1.3 CONVERSION PARTS P331
1.3.1 Conversion parts for changing of strap width and strap thickness
1.3.2 Conversion parts from Semi automatic to Automatic
Semi
Automatic
43.0274 43.0276 43.0282 43.0284 43.0286 43.0292 43.0294 43.0296
Automatic
43.0275 43.0277 43.0283 43.0285 43.0287 43.0293 43.0295 43.0297
19/0.80-1.19 19/1.20-1.53 25/0.60-0.79 25/0.80-1.19 25/1.20-1.35 32/0.60-0.79 32/0.80-1.19 32/1.20-1.35
Steel insert
P33.2140 P35.4103 P33.2139 P33.2140 P35.4103 P33.2139 P33.2140 P35.4103
Gripper
P35.4186 P35.4186 P35.4189 P35.4186 P35.4186 P35.4189 P35.4186 P35.4186
Gripper
P35.4187 P35.4187 P35.4190 P35.4187 P35.4187 P35.4190 P35.4187 P35.4187
Gripper
P35.4185 P35.4185 P35.4188 P35.4185 P35.4185 P35.4188 P35.4185 P35.4185
Guide case
P35.4202 P35.4202 P35.4202 P35.4202 P35.4202 P35.4201 P35.4201 P35.4201
Guide pin
right
P33.1259 P33.1259 P33.1236 P33.1236 P33.1236 P33.1236 P33.1236 P33.1236
Guide pin
left
P33.1259 P33.1259 P33.1237 P33.1237 P33.1237 P33.1237 P33.1237 P33.1237
Tensioning
wheel
P33.2229 P33.2229 P33.2230 P33.2229 P33.2229 P33.2230 P33.2229 P33.2229
Strap stop
P35.4194 P35.4194 P35.4193 P35.4193 P35.4193 P35.4192 P35.4192 P35.4192
Strap guide
P33.2141 P33.2141 P33.2149 P33.2149 P33.2149 P33.2150 P33.2150 P33.2150
Safety
washer
N1.6504
(12 St.)
N1.6504
(12 St.)
N1.6504
(10 St.)
N1.6504
(12 St.)
N1.6504
(12 St.)
N1.6504
(10 St.)
N1.6504
(12 St.)
N1.6504
(12 St.)
Semi Automatic Automatic
Circuit board
P33.2116 P33.2138
Switch
P33.2118 P33.2120
Adhesive label
N44.9140 N44.9169
Attention!
When converting tools always change the item number on the type label.
Replace following parts:
Type label N43.9182
2 x hammer head bolts N2.4902
Enclose the suitable operation manual with the tool after each
conversion
(see paragraph 1.9.1 Ordering manuals).