To Next PageTo Next Page
Need help?Do you have a question about the Fromm P328S and is the answer not in the manual?
General| Model | P328S |
|---|---|
| Category | Packaging equipment |
| Sealing Type | Friction weld sealing |
| Tension | Adjustable |
| Type | Battery-powered strapping tool |
| Strapping Material | PP and PET |
| Strapping Thickness | 0.40 - 1.05 mm |
| Power Supply | Battery |
| Dimensions | L 334 x W 138 x H 148 mm |
Symbols and signal words used in this operation manual or on the strapping tool.
Defines intended use and emphasizes reading operation manual and general safety rules.
Covers strap breakage, deficient sealing, misuse, cutting hazards, and maintenance.
Includes work area, electrical, and personal safety for power tools.
Guidance on proper use, maintenance, battery care, and service.
Overview of the P328S strapping tool's functionality, dimensions, and weight.
Details on emitted sound pressure and vibration levels.
Compliance statement regarding radio frequency emissions.
Description of CLASSIC and ADVANCED work menus and operation modes.
Settings for strap tension, speed, material, and seal type.
Recommended temperatures and information on remote module data transmission.
Details on available battery models, chargers, and their compatibility.
Information on the mobile app and optional power supply.
Details on optional fan and suspension brackets for the tool.
Description of optional wearing and protection plates for the tool base.
Description of the touchscreen interface for tool operation.
Functionality of unlatching push button and handle lever.
Procedure for inserting and removing the battery from the tool.
How to check the battery charge level on the battery unit.
Navigating menus, setting modes, and managing the key block.
Configuring strap tension, welding time, and managing the strap database.
Accessing tool info, updating firmware, and managing maintenance.
Step-by-step guides for all CLASSIC and ADVANCED operation modes.
Instructions for feeding and inserting the strap around the package.
Procedure for tensioning, sealing, and removing the tool.
How to visually inspect and control the quality of the seal.
List of available P328S models and their strap specifications.
Specifications for P328S models with activated remote module.
Diagram showing the electrical connections of the ELS.1126 system.
Steps for disassembling the tool to access wearing parts.
Procedure for replacing the tensioning wheel and grippers.
Procedure for replacing the cutter and welding grippers.
Table listing wearing parts specific to different tool models.
Procedure for readjusting the coupler after replacement.
Instructions for cleaning the strap gripping parts and tool surfaces.
Guidelines for servicing and repair by authorized centers.
Troubleshooting common error messages and their corrections.
Requirements for transporting batteries and proper disposal of the tool.
Terms and conditions of the manufacturer's warranty.
Information on how to obtain the spare parts list for the tool.
