Operation manual P328S
8
© 2018 FROMM Holding AG
All rights reserved. Reproduction and duplication - also in extracts - are not permitted.
3 Technical data
Description of the tool
The tool model P328S has been designed to strap packages with plastic strapping. The plastic strapping is
fed around the package manually or in combination with a strap feeder. The straps are inserted in the tool,
tensioned, sealed by friction welding and separated from the strap coil.
Tool size with battery
Weight
with battery N5.4349: 4.3 kg / 9.6 lbs
with battery N5.4353: 4.7 kg / 10.4 lbs
Noise information
The A-weighted emission sound pressure level at the work place of the machine operator is
typical 79 dB(A).
This value was determined according to EN ISO 11204.
Uncertainty K: 2.5 dB
Hearing protection is recommended.
Vibration information
The vibration total value typically amounts to less than 2.5 m/s².
This value was determined according to DIN EN 60745-1/2-18.
Uncertainty K: 1.5 m/s²
The vibration emission level and noise emission values given in this manual has been measured in
accordance with a standardized test and may be used to compare one tool with another.
It may be used for a preliminary assessment of vibration exposure.
Depending on the type of packaged goods and the way the tool is used, the actual values may differ from the
specified values.
An exact estimation of the level of exposure to vibration should also take into account the times when the tool
is switched off or when it is running but not actually doing the job. This may significantly reduce the exposure
level over the total working period. Identify additional safety measures to protect the operator from the effects
of vibration such as: maintain the tool, keep the hands warm, organization of work patterns.
Federal Communications Commission (FCC) Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct the interference at
his own expense.
Dimension with battery N5.4349 with battery N5.4353
Length 351 mm / 13.8" 367 mm / 14.4"
Width 134 mm / 5.3" 134 mm / 5.3"
Height 143 mm / 5.6" 160 mm / 6.3"
To Next Page
Loading...
