Fromm P328S - Detailed Operation Modes

Operation manual P328S
20
© 2018 FROMM Holding AG
All rights reserved. Reproduction and duplication - also in extracts - are not permitted.
7.10 Work Menus and Operation Modes
7.10.1 CLASSIC Work Menu, MAN Operation Mode (Manual)
 Tension Key
• Press the tension key until the desired tension is reached.
 The tension can be interrupted by releasing the tension key and started
again.
 Welding key
• Tap the welding key.
- The plastic material strap is welded and simultaneously removed
from the remaining strap material.
Welding time, cooling-down time
When the set welding time is finished, the cooling-down time starts.
The following appears:
- A yellow 6-step segment display shows the welding time in a clockwise
direction.
- A green 6-step segment display shows the cooling time counter-
clockwise.
- When the cooling time is finished, a flag appears and a tone indicate the
end of the cycle.
 STRAP CONNECT- function:
Tap the welding key twice within 0.5 seconds to activate the welding
key. This starts welding without setting the tension first.
 Strap tension and welding time setting
Shows the current set tension and welding time.
 See 7.2 Set Strap Tension and Welding Time
 If, when the battery is inserted, there is a warning, the caution symbol
will appear for 10 seconds on the  key. Work can be continued.
Tap to open the Information menu - the warning is displayed.
 See 7.6 Information Menu
 Display of the battery charge / operation mode
The battery charge is shown in increments of 25% and the active operation mode is displayed.
 Selection key
• Tap to open the adjustment menu.
 See 7.1 Adjustment menu
7.10.2 CLASSIC Work Menu, SEMI Operation Mode (semi-automatic)
 Tension Key
• Pres the tension button until the set tension is reached.
- Once the set tension is reached, the welding process starts
automatically.
 The tension can be interrupted by releasing the tension key and started
again.
• When the welding starts, release the tension key.
- The plastic material strap is welded and simultaneously removed
from the remaining strap material.
Welding time, cooling-down time  See 7.10.1
 See 7.10.1




+

