Operation manual P328S
12
© 2018 FROMM Holding AG
All rights reserved. Reproduction and duplication - also in extracts - are not permitted.
4.7 Wearing plate
As an option, the tool can be equipped with a wearing
plate to protect the base from excessive wear on
abrasive package surfaces.
The complete wearing plate can be ordered together
with the fastening screws under item number
P32.0224.
If the complete bottom side of the tool has to be
protected, the plate P32.0225 must be used.
4.8 Protection plate (plastic)
For using the P328S on packages with sensitive
surface there can a plastic protection plate be mounted
for protecting the package.
The complete protection plate can be ordered together
with the fastening screws under item
number P32.0240.
5 Operating elements
P32.0224
N1.2163
P32.8303
P32.8304
P32.0225
N1.2163
P32.0240
P32.8316
N1.2163
Touchscreen
Unlatching push button
Handle lever
To Next Page
Loading...
