Need help?Do you have a question about the Fromm P320 and is the answer not in the manual?
Information about the battery included with the P320 tool.
Details on ordering replacement battery chargers for different countries.
Description of the optional wearing plate for protecting the tool base.
Information on the suspension bracket for hanging the tool on a balancer.
Instructions for installing the battery into the tool.
Overview of tool adjustments for strap tension, welding time, and pressure.
How to adjust the strap tensioning force using the dedicated knob.
Procedure for setting the correct welding time based on strap characteristics.
Method for adjusting welding gripper pressure based on strap thickness.
Steps for correctly feeding the plastic strapping around the package.
Guide on how to insert the straps into the tool properly.
Process for tensioning the strap using the tool's switch rocker.
Procedure for sealing the straps using the lever and LED indicators.
Steps for safely removing the tool after sealing.
Visual inspection guidelines for the quality of the strap seal.
Procedure for disassembling and assembling tensioning wheel and grippers.
Detailed steps for replacing the cutter and grippers.
Procedure for readjusting the coupler after component replacement.
To Next Page
General
