7
Cutting off of the plastic strap
By raising the lifting handle the gripper is released
and the plastic strap is cut off.
Removing the tool
Remove the tool from the strap to the right with
the lifting handle in a raised position.
Straightening the plastic strap
Remove the strap from the tensioning drum and
straighten the strap bent by the winding of the
tensioning drum.
Operation of the tool with a horizontal
handle
Upon request the tool can be provided with a
horizontal handle P40.2046 consisting of a plug
P40.2047 and the grip ball N4.1118.
After the removal of the protection plug N4.5120
the horizontal handle can be screwed into the
body.
To Next Page
Loading...
