78
Technical data
Acctiva Profes-
sional Flash,
Acctiva Profes-
sional Flash AUS,
Acctiva Profes-
sional Flash JP,
Acctiva Profes-
sional 30A JP
* If the ambient temperature rises to above 35°C (95°F) or thereabouts (depending
on secondary voltage), the secondary output current is reduced (power derating)
Mains voltage (+/- 15%)
Acctiva Professional Flash
Acctiva Professional Flash AUS
Acctiva Professional Flash JP
Acctiva Professional 30A JP
230 V AC, 50/60 Hz
240 V AC, 50/60 Hz
100 V AC, 50/60 Hz
100 V AC, 50/60 Hz
Nominal output max.
Acctiva Professional Flash
Acctiva Professional Flash AUS
Acctiva Professional Flash JP
Acctiva Professional 30A JP
1080 W
1080 W
1080 W
710 W
Charging voltage 12,0 - 15,5 V
Charging current I
2
(adjustable)
Acctiva Professional Flash
Acctiva Professional Flash AUS
Acctiva Professional Flash JP
Acctiva Professional 30A JP
2 - 50 A
2 - 50 A
2 - 50 A
2 - 30 A
Boost mode charging current
t
2 max
(tI
2 max
= 30 s, tI
2
= 60 s)
Acctiva Professional Flash
Acctiva Professional Flash AUS
Acctiva Professional Flash JP
Acctiva Professional 30A JP
max. 70 A
max. 70 A
max. 70 A
max. 30 A
Nominal charging capacity 10 - 250/300 Ah
Number of cells 6
Charging characteristic IUoU / IUa / IU
Operating temperature * 0 °C to +60 °C
32 °F to 140 °F
Storage temperature -20 °C to +80 °C
4 °F to 176 °F
Interface USB
Climate class (EN50178) B
EMC Class
Acctiva Professional Flash
Acctiva Professional Flash AUS
Acctiva Professional Flash JP
Acctiva Professional 30A JP
IEC/EN 61000-6-4/2 (EMC class A)
IEC/EN 61000-6-4/2 (EMC class A)
IEC/EN 61000-6-4 (EMC class A)
J 55014
Protection IP 21
Marks of conformity see charger rating plate
Weight inclusive of mains and charger
leads
6,5 kg
14.33 lb.
Dimensions w x h x d 315 x 200 x 110 mm
12.40 x 7.87 x 4.33 in.
To Next Page
Loading...
