Fronius ActiveCharger 1000 - TIG Comfort Stop

43
EN
TIG Comfort Stop For more information on activating and setting the TIG Comfort Stop function, see Comfort
Stop Sensitivity on page 46.
Function and application of TIG Comfort Stop:
Welding
During welding, raise the welding torch
- The arc length is increased significantly
Lower the welding torch
- The arc length is decreased significantly
- This triggers the TIG Comfort Stop function
Keep the welding torch at the same height
- The welding current continually decreases (downslope) until the arc goes out
Wait for the gas post-flow time to finish and lift the welding torch away from the work-
piece
Welding current and gas flow curve with TIG Comfort Stop function activated
(1) Gas pre-flow
(2) Gas post-flow
1 2 3 4 5+
1
2
3
4
5
t
tdown
I
Max. A
70 A
(1)
(2)
1 2
3 4 5+