Fronius FK 5000 - Connecting and Filling Procedures

34
Connecting the cooling unit to the power source
Safety
WARNING!
Danger from electric current.
An electric shock can be fatal.
► Before starting the work described below:
► Turn the power source mains switch to the "O" position.
► Disconnect the power source from the mains.
► Ensure that the power source remains disconnected from the mains until all work has
been completed.
► After opening the device, use a suitable measuring instrument to check that electrically
charged components (e.g. capacitors) have been discharged.
WARNING!
Danger from inadequate ground conductor connections.
This can result in severe personal injury and damage to property.
► The housing screws provide a suitable ground conductor connection for earthing the
housing and must NOT be replaced by any other screws that do not provide a reliable
ground conductor connection.
Connecting the
cooling unit to the
power source
CAUTION!
Risk of short circuit from kinked or damaged cables.
When connecting the power source to the cooling unit, ensure that the cables are not
kinked.
1 2
*)  Cooling unit scope of supply
5
3
4
7
6
8
9
2
1
1
2
2
1
3
*)
*)
*)
*)
2