Fronius FK 5000 - Page 53

53
EN
1
1
NOTE!
Seal off the coolant hose as soon as it is
pulled out of the coolant pump connec-
tion.
This will ensure that as little coolant as pos-
sible enters the device. Immediately remo-
ve any coolant that enters the device or
spills onto its exterior.
2 3
NOTE!
If the coolant connections are on the front of the cooling unit, carry out the following
steps as shown - but at the front coolant flow connection (blue).
2
3
1
6
4
5
1
1
3
2
4
2
1
3
2
4
min.
3
3
1
2
4