Fronius IG 400 - Page 27

19
Overview of
display values
(continued)
„Now“ display mode
„Day“ / „Year“ / „Total“ display mode
Power fed into the mains
(W)
Energy fed into the mains
(kWh / MWh)
Mains voltage
1)
(V)
Current fed into the mains
1)
(A)
Mains frequency
(Hz)
Module voltage
2)
(V)
Module current
(A)
* Module temperature
(°C; or alternatively °F)
Insulation resistance
(MOhm)
Return
(Currency can be selected)
Maximum power fed into the mains
(W)
* Recorded by the consumption meter
Energy (kWh / MWh)
CO
2
reduction
(kg / t)
Maximum mains voltage
(V)
* Maximum module temperature
(°C; or alternatively °F)
Minimum mains voltage
(V)
* Minimum module temperature
(°C; or alternatively °F)
* Recorded by the consumption meter
Power (W)
* Ambient temperature
(°C; or alternatively °F)
* Insolation
(W/m²)
* Maximum insolation
(W/m²)
* Maximum ambient temperature
(°C; or alternatively °F)
* Minimum ambient temperature
(°C; or alternatively °F)
* Time
(HH:MM)
Maximum module voltage
(V)
Service hours completed by the
FRONIUS IG
(HH:MM)
1)
Value displayed is applicable to the mains phase of the master power module. Use
the „Enter“ key to call up the submenu for the other mains phases (L1, L2, L3).
Value for phase 1 (L1)
Value for phase 2 (L2)
Value for phase 3 (L3)
Return to main menu
2)
Displayed value applies to the master power module.
=
~