52
Installing plug-in
cards
(continued)
Important! Route the cable for the plug-in card up as far as the option rack. There is a
passage in the cable channel for feeding in the cable.
The LocalNet automatically detects different add-on system components (datalogger,
sensor card etc.).
In order to distinguish between several identical add-on system components, each one
of them must be assigned a unique number.
Likewise, in order for each FRONIUS IG to be defined unambiguously in the LocalNet,
they must also be assigned a separate number each.
This procedure is described in the chapter entitled „The Setup Menu“ in the operating
instructions.
Configuration
2
2
1
3
2
1
1
1
2
1
4
3
4
1
2
2
1
3
2
1
To Next Page
Loading...
