Fronius IG 400 - The Display Modes; Scrolling between Display Functions; Overview of Display Modes; Overview of Display Values

18
The display modes
Overview of
display modes
The following display modes are available:
„Now“ display mode ... Displays real-time values
„Day“ display mode ... Displays values for power fed into the mains during that day
„Year“ display mode ... Displays values for power fed into the mains during the current
calendar year - only in conjunction with an optional datalogger
„Total“ display mode ... Displays values for power fed into the mains since the FRONI-
US IG was originally commissioned.
Overview of
display values
The table below provides an overview of the display values available.
Those display values listed without a footnote will be displayed in a „standard“ setup
(factory setting).
* Optional - If the necessary option card is not present, then the letters „N.C.“ are
displayed (not connected)
Scrolling
between display
functions
(A) (B) (A) (B)
- Choose your preferred display mode (see above)
- Use keys (A) and (B) to scroll between the available display functions
(A) (B)