Fronius IG 400 - Page 43

35
Important! The „Time“ menu option is
only supported when the optional data-
logger is connected.
- “Time” ... Setting time and date
- To initiate time adjustment: Press
“Enter” key (D)
(C) (D)
(D)
(B)(A)
(B) (D)(A)
(D)(C)
(C)
(D)
1. Setting date
(e.g.: 03.10.2003)
- First digit flashing
- Use key (A) or (B) to select a number
for the first digit
- Press „Enter“ key (D) to confirm
- Next digit flashing
- The procedure for entering the other
digits is the same as for the first digit
(described above)
- Accept the date setting: Press „Enter“
key (D)
- Restore previous setting: Press „Esc“
key (C)
(D)
(B)(A)
(B) (D)(A)
(D)(C)
(C)
(D)
2. Setting the time (e.g.: 15:47)
- First digit flashing
- Use key (A) or (B) to select a number
for the first digit
- Press „Enter“ key (D) to confirm
- Next digit flashing
- The procedure for entering the other
digits is the same as for the first digit
(described above)
- Accept the time setting and start the
clock: Press „Enter“ key (D)
- Restore previous setting: Press „Esc“
key (C)