2
General remarks
Machine concept The FRONIUS IG personal display enables current performance data to be viewed at
any time at any location within a specified distance of the unit.
All that is required to enable data to be sent to the personal display is the relevant
display card with a radio antenna for the FRONIUS IG. The power for the personal
display is supplied from batteries or from the power supply unit supplied with the equip-
ment. Performance data from up to 15 FRONIUS IGs can be shown on the personal
display. The different display modes enable performance data from the whole installation
or from each individual inverter to be viewed.
System require-
ments
FRONIUS IG system requirements for running the FRONIUS IG personal display:
- FRONIUS IG with serial number 17xxxxxx or above
- Relevant display card with radio antenna for FRONIUS IG
Functional prin-
ciple
Fig.1 Functional principle
Notes on identifi-
cation require-
ments for radio
appliances
Changes or modifications of the radio module not expressly approved are not allowed
and will void the user’s authority to operate the equipment.
In the USA, radio modules are subject to FCC requirements:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful interfe-
rence, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC ID: QKWFRF905
To Next Page
Loading...
Need help?
General
