Fronius KD 1500 D-11 - Fitting the Welding Torch; Fit the Welding Torch

25
EN
Fitting the welding torch
Fit the welding
torch
turn the power source mains switch to the "O" position
If present: connect colour-coded external water connections for water flow (11) and
return (7)
Plug welding potential bayonet plug into current socket (4) and turn to fasten it
Insert the wirefeed, infeed tube first, into the wirefeeding connection (3)
Tighten the union nut by hand to fix in place
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(12)
(11)
(10)
(8)
(9)
1
2
3
4
5