Connecting the
welding torch
1
To connect the control line to the respec-
tive welding system, it is recommended to
use one of the following adapter cables:
- Adapter cable Control Plug Lincoln
(43,0004,0458)
- Adapter cable Control Plug Tweco
(43,0004,0461)
- Adapter cable Control Plug Miller
(43,0004,0457)
Connect the respective adapter cable to
the control line of the welding torch as
shown.
Refer to the Operating Instructions of the
respective welding system for information
on how to connect to the welding system.
42
To Next Page
Loading...
