EasyManuals Logo

Fronius Primo 6.0-1 Installation Instructions

Fronius Primo 6.0-1
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
IMPORTANT! The PE ground conductor of the AC cable must be laid in such a
way that it is the last to be disconnected in the event that the strain-relief device
should fail.
This can be ensured, for example, by making it somewhat longer and by laying it
in a loop.
If AC cables are laid over the shaft of the DC main switch or across the connec-
tion block of the DC main switch, they may be damaged when the inverter is
swung in, or they may even prevent the inverter from being swung in.
IMPORTANT! Do not lay AC cables over the shaft of the DC main switch or
across the connection block of the DC main switch.
If overlength AC or DC cables are to
be laid in loops in the connection area,
attach the cables with cable ties to the
eyelets provided on the top and bot-
tom of the connection block.
Maximum fuse
rating on altern-
ating current
side
18

Table of Contents

Other manuals for Fronius Primo 6.0-1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fronius Primo 6.0-1 and is the answer not in the manual?

Fronius Primo 6.0-1 Specifications

General IconGeneral
Purpose-
Efficiency6 %
Output power6000 W
Input voltage80 - 1000 V
Output voltage180 - 270 V
Input frequency- Hz
Output frequency50/60 Hz
Power supply typeUniversal
Power current typeDC-to-AC
Output power capacity0 kVA
Quantity per pack1 pc(s)
Product colorBlack, Grey

Related product manuals