Fronius Primo Installation

7
Fronius manufac-
turer's warranty
Detailed, country-specific warranty terms are available on the internet:
www.fronius.com/solar/warranty
To obtain the full warranty period for your newly installed Fronius inverter or storage sys-
tem, please register at: www.solarweb.com.
NOTE! Ensure the polarity is correct when connecting the DC cables.
NOTE! For grounding solar module frames or racks, the relevant specifications from the solar module
manufacturer must be taken into account along with national guidelines.
NOTE! Observe the ESD guidelines when handling option cards.
NOTE! If the inverter is installed in Australia or New Zealand (required standard: AS4777.2:2015), the
inverter must not be used as part of a three-phase combination, as there is no communication link bet-
ween the inverters

Fronius Primo Specifications

General

Category	Inverter
AC nominal output	3.0 - 8.2 kW
Grid frequency	50 Hz / 60 Hz
THD	< 3 %
Power factor (cos φac,r)	0.85 - 1 ind./cap.
Efficiency	98%
Max. input voltage	1000 V
MPP voltage range	240 - 800 V
Number of DC connections	2
Number of MPP Trackers	1
Dimensions (H x W x D)	645 x 431 x 204 mm
Weight	21.5 kg
Protection class	IP65
Operating temperature range	-40 °C to +60 °C
Warranty	5 years
Model	Primo
AC nominal voltage	230 V