43
EN-US
USB Flash Drive
for Updating In-
verter Software
The USB flash drive can be used even by
end customers to update the software of
the inverter. The update file is saved to the
USB flash drive beforehand and transmit-
ted from there to the inverter, and the up-
date process is started through the Setup
menu.
Removing the
USB Stick
NOTE! Please be aware that in outdoor applications the USB stick may only func-
tion in a limited temperature range. Make sure, for example, that the USB stick
will also function at low temperatures for outdoor applications.
USB
+
3
5
4
4
1
2
2
Safety information for removing a USB stick
IMPORTANT! To prevent a loss of data,
the connected USB stick should only be
removed under the following conditions:
- via the SETUP and "Safely remove
USB / hardware" menu items
- when the "Data Transfer" LED is no
longer flashing or illuminated.
Do not disconnect
USB-Stick
while LED is flashing!
X
To Next Page
Loading...
