EasyManuals Logo

Fronius Symo GEN24 6.0 User Manual

Fronius Symo GEN24 6.0
192 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
Safety rules
Explanation of
safety notices
WARNING!
Indicates a potentially hazardous situation.
If not avoided, death or serious injury may result.
CAUTION!
Indicates a situation where damage could occur.
If not avoided, minor injury and/or damage to property may result.
NOTE!
Indicates a risk of flawed results and possible damage to the equipment.
If you see any of the symbols depicted in the "Safety rules" chapter, special care
is required.
Safety
CAUTION!
Danger from crushing due to the incorrect handling of attachments and con-
nection parts.
Injuries to limbs may result.
When lifting up, putting down and attaching the inverter, use the integrated
grips.
When fitting attachments, ensure that no limbs are located between the at-
tachment and the inverter.
Do not hold onto the individual poles on the terminals when locking and un-
locking.
General The device has been manufactured in line with the state of the art and according
to recognised safety standards. In the event of incorrect operation or misuse,
there is a risk of
-
Injury or death to the operator or a third party
-
Damage to the device and other material assets belonging to the operating
company
All personnel involved in commissioning, maintenance, and servicing of the
device must:
-
Be suitably qualified
-
Have knowledge of and experience in dealing with electrical installations
-
Have fully read and precisely followed these Operating Instructions
In addition to the Operating Instructions, all applicable local rules and regula-
tions regarding accident prevention and environmental protection must also be
followed.
8

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fronius Symo GEN24 6.0 and is the answer not in the manual?

Fronius Symo GEN24 6.0 Specifications

General IconGeneral
AC nominal output6.0 kW
Protection classIP66
TopologyTransformerless
Operating temperature range-25°C to +60°C
AC nominal voltage230 V
Number of MPP trackers2
Maximum Input Voltage1000 V
CoolingActive cooling
Max. apparent AC power6000 VA
AC voltage range160 V - 280 V
Max. input current (DC)12.5 A
MPP voltage range80 V - 800 V
Max. DC power9000 W
Maximum Input Power9000 W
MPPT Range80 V - 800 V
Warranty5 years

Related product manuals