Fronius Symo User Manual

32
Starting for the first time
Starting the in-
verter for the first
time
WARNING!
Danger due to incorrect operation and incorrectly performed work.
This may result in serious injury and damage to property.
► Only qualified staff are authorised to commission your inverter and only within the
scope of the respective technical regulations.
► Read the Installation and Operating Instructions before installing and commissioning
the equipment.
When starting the inverter for the first time, it is necessary to select various setup settings.
If setup is interrupted before it is complete, it can be restarted by means of an AC reset.
An AC reset can be carried out by switching the automatic circuit breaker off and on again.
The country setup can only be set when starting the inverter for the first time. If the country
setup needs to be changed at a later date, please contact your Technical Support team.
1
2 3
AC
ON
2
I
0
3
1
1
2
1
2
S
e
l
e
c
t
C
o
u
n
t
r
y
1
2
50 Hz
International 50 Hz
3

Fronius Symo Specifications

General

THD	< 3 %
Number of MPP Trackers	2
Protection Class	IP65
Frequency Range	50 / 60 Hz
Operating Temperature Range	-25°C to +60°C
Power Range	3.0 kW - 20.0 kW
AC Output Voltage	230 V
Communication	Ethernet
Warranty	5 years
Model	Symo