Need help?Do you have a question about the Fronius TransPocket 1400 and is the answer not in the manual?
General| Input Voltage | 230 V |
|---|---|
| Welding Current Range | 10 - 140 A |
| Duty Cycle | 35% at 140 A |
| Mains Voltage | 230 V |
| Mains Frequency | 50/60 Hz |
| Protection Class | IP 23 |
| Insulation Class | F |
| Rated Input Voltage | 230 V |
| Input Frequency | 50/60 Hz |
| Rated Input Current | 16 A |
| Output Current | 140 A |
Covers general remarks, intended use, and owner/personnel obligations for safe operation.
Details essential personal protective gear required for welding operations.
Identifies hazards from gases, sparks, mains current, and specific dangerous spots.
Outlines safety measures for machine setup, operation, and routine inspections.
Addresses alterations, spare parts, calibration, CE marking, and copyright information.
Explains the welding rectifier's core technology, design features, and build quality.
Illustrates the machine's application for manual electrode and TIG welding processes.
Details the function of main switches, indicators, and adjustment dials on the operating panel.
Describes the bayonet latch sockets for connecting welding cables and torches.
Defines the machine's intended purpose and outlines essential setup regulations and warnings.
Covers mains voltage requirements, connection procedures, and precautions for plugging in the machine.
Provides step-by-step instructions for setting up and initiating manual electrode and TIG welding.
Lists key technical parameters including voltage, current range, efficiency, power, and protection class.
Identifies frequent operational errors, their causes, and recommended remedies for troubleshooting.
To Next Page