64
CMT Remote control panel
General The CMT Remote control panel is fitted to the CMT Remote power source and CMT Ad-
vanced power source. The CMT Remote power source and CMT Advanced power source
are designed for automated and robot applications and are controlled exclusively via the
LocalNet.
The CMT Remote power source and CMT Advanced power source can be operated via
the following system add-ons:
- RCU 5000i remote control
- ROB 5000 robot interface
- Field bus systems
CMT Remote and
CMT Advanced
control panel
No. Function
(1) Error indicator
lights up if an error has occurred. The corresponding error message is displayed
on all devices connected to the LocalNet that have a digital display.
The error messages displayed are described in the section headed “Trouble-
shooting”.
(2) Robot interface indicator
lights up when the power source is switched on and a robot interface or field bus
system is connected to the LocalNet
(3) Power source ON indicator
lights up for as long as the mains cable is plugged in and the mains switch is in
the “I” position
CMT 4000
Advanced
(3)
(2)
(1)
To Next Page
Loading...
