24
Warning notices
on the device
Warning notices and safety symbols are affixed to the power source. These warning notic-
es and safety symbols must not be removed or painted over. They warn against operating
the device incorrectly, as this may result in serious injury and damage.
Safety symbols on the rating plate
Welding is dangerous. The following
basic requirements must be met:
- Welders must be sufficiently quali-
fied
- Suitable protective equipment
must be used
- All persons not involved in the
welding process must be kept at a
safe distance
Do not use the functions described here
until you have thoroughly read and un-
derstood the following documents:
- these operating instructions
- all the operating instructions for the
system components, especially
the safety rules
To Next Page
Loading...
