Fronius TransSteel 5000 Rob - Start-up Procedures and Connections

44
TSt 3500 Rob / 5000 Rob start-up
Fitting the system
components
(overview)
For detailed information about the individual steps, please refer to the operating instruc-
tions for the system components.
Strain relief de-
vice
1
Connecting the
interconnecting
hosepack
1
WARNING! Work that is carried out incorrectly can cause serious injury and dam-
age. The following activities must only be carried out by trained and qualified per-
sonnel. All instructions in the section headed "Safety rules" must be observed.
1
2
3
4
1
IMPORTANT! There is no cooling unit present in the case of gas-cooled systems. There
is no need to attach the water connections in the case of gas-cooled systems.
1