Fronius TransSynergic 5000 - TIG Welding with TIG Comfort Stop

116
Keeping the torch at the same height and then remo-
ving it
Keep the torch in the same position
- The welding current is continuous-
ly decreased (downslope)
- The arc goes out
Raise the torch from the workpiece.
TIG welding with
TIG Comfort Stop
Welding current curve with the TIG Comfort Stop option activated:
I ..........Preset welding current
SL ...... Downslope
TIG welding process with the optional TIG Comfort Stop function activated
NOTE! The downslope is preset
and cannot be adjusted.
4
5
I
t
I
SL