23
EN
(2) Arc length/arc-force dynamic adjuster
has a different function depending on the welding process being used
- Correcting the arc length
(during MIG/MAG pulse synergic welding, MIG/MAG standard synergic weld-
ing)
- = shorter arc length
0 = neutral arc length
+ = longer arc length
- Setting the welding voltage
(during MIG/MAG standard manual welding)
- Influencing the short circuit amperage at the instant of droplet transfer
(during MMA welding)
0 = soft, low-spatter arc
100 = harder and more stable arc
To Next Page
Loading...
