FS N Series - Applications of Connection for N Series Switches with Transceivers and Fiber; Enclosures; Connection for FS N8500-32 C 100 G Switch with 100 G QSFP28 SR4 Transceivers

For Technical Support: www.fs.com/service.html8
4.2 Applications of Connection for N Series Switches with Transceivers and Fiber
Enclosures
N-Series Switches are Top-of-Rack (TOR), Spine or Leaf switches for high-performance data centers. When interconnect
100G QSFP28 SR4 Optics transceivers
for your ultra high speed networks, the use of MTP MMF cabling is generall
y the
preferred c
abling method. As shown in below interconnection, including HD fiber enclosures are used to complete the
interconnection and to connect two same speed switches with optical transceivers or optical c
ables. With increasing
number of network connections in d
ata centers, the 12-Fiber channel 40GbE migration plan is quickly becoming a
matter of survival. The figure 4-5 below shows the connections of N-Series switches from low to high speed.
4.2.1 Connection for FS N8500-32C 100G Switch with 100G QSFP28 SR4 Transceivers
QSFP28 100G SR4
Cisco Nexus 3232C Switch
QSFP28 100G SR4
FS N8500-32C