For Technical Support: www.fs.com/service.html12
Please mount N8000-32Q on the 19’’ rack as below:
(1)
Attach the 2 brackets on the N8000-32Q with screws provided in the accessory kit.
(2) Put the machine on the stock of the rack when installing because the machine is quite he
(3) Put the bracket-mounted switch smooth
ly into a standard 19’’ rack. Fasten the N8000-32Q to the rack with the
. Leave enough space around the switch for good air circulation.
Caution!
The brackets are used to fix the switch on the rack
. They can’t serve as a bearing.
Please place a rack shelf under the
switch
. Do not place anything on top of the switch.Do not block the blowholes on the switch to ensure the proper
Figure 6-2 The Figure of N8000-32Q Switch Installing on the Rack by Using the Front and Back Horn Iron.
The figure of back horn iron installation is as below:
To Next Page
Loading...
