Command: ASTAV
Description:
Factory use only, returns a number of status bytes indicative of the current audio volume states.
Parameters:
None
Example:
astav
Command: ATRM
Description:
Audio source trim command
Parameters:
c - audio source channel [1..8]
v - audio trim setting [0..51]
Example:
atrm 2 26 - set audio input channel two trim value to 26
Command: ATRN
Description:
Audio transition command.
Parameters:
t - transition time in milliseconds [0..5000]
c - crossfade delay time in milliseconds [0..5000]. It is always less than t.
Example:
atrn 3000 1000 - perform an audio transition of 3 seconds with a crossfade delay of one second.
Command: AVOL
Description:
Audio volume adjustment.
Parameters:
t - volume type
1 = main master volume
2 = main source volume
3 = main microphone volume
4 = main line volume
5 = preview master volume
6 = preview source volume
7 = preview microphone volume
8 = preview line volume
i - volume decrement or increment (-1=decerment,1=increment]
r - volume rate of change
10 - fast
25 - moderate
40 - slow
Example:
avol 1 -1 10 - reduce the main master volume as quickly as possible
Compass S
2
39
To Next Page
Loading...