Command: HELP I
Description:
Displays the list of available command on a terminal emulator.
Parameters:
i – Alphabetical Index [A – Z]; Optional Parameter
Example:
HELP?: Returns the command list.
HELP P?: Returns the entire command list starting with the first command that starts with “P”.
Command: IBRT op nnn sclr
Description:
Adjusts the Input Brightness value.
Parameters:
op - Select Brightness Control;
[C|R|G|B] Common, Red Offset, Green Offset, Blue Offset
nnn - Brightness value; C Range 75 - 125%, RGB Range -25 - 25%
sclr - Scaler [A|B|M|P]; Scaler A | Scaler B | Main | Preview
Example:
IBRT C 110.5 A: Adjusts the Input Brightness on Scaler A to be 110.5%.
IBRT R 10 M: Adjusts the Red Offset to 10% for the Input on Main.
Command: ICDEL nn
Description:
Deletes a specified Input Configuration.
Parameters:
nn - Input Configuration Index; n[1 - 64]
Example:
ICDEL 2: Deletes input configuration two.
Command: ICFGN n
Description:
Fetch input configuration file name.
Parameters:
n - File number [1 – 64]
Example:
ICFGN 1: Returns the name associated with file number 1.
Command: ICGTE n sclr
Description:
Adjusts the Input Clamp Gate mode.
Parameters:
n - Clamp Gate Selection; SYNC|PRCH; 0|1|2
sclr - Scaler [A|B|M|P]; Scaler A | Scaler B | Main | Preview
Examples:
ICGTE 0 A: Adjusts the Input Clamp Gate on Scaler A to be SYNC
ICGTE 1 A: Adjusts the Input Clamp Gate on Scaler A to be PRCH
ICGTE 2 A: Adjusts the Input Clamp Gate on Scaler A to be PDLY
Command: ICNT op nnn sclr
Description:
42 Compass S
2
To Next Page
Loading...