Fuba ODE821CI+HD - Multi-Satellite Search; Transponder List Management; System Setup Options

Fuba
• FTA only: only Free-To-Air channels; the default values is No, that is extend search also to scrambled channels
• Scan Channel: searching only TV channels, Radio channels or both
• Network Search: searching channel that belongs to a network
• Scan Mode: Auto or Preset. Preset mode follows the TP list associated with the choosen satellite while automatic search
perform a global search, not following TP list associated with the satellite.
To start the channel search, press OK on Search.
4.3.5 Ricerca Multi-Satellite Search
Multi Satellite Search menu has the same functions of Single Satellite Search menu, the only difference is that the search is for
all satellites chosen in satellite list (par. 4.3.2).
4.3.6 TP List
TP List menu functions scan/update channels belonging to a specific transponder. To run a scan you must know the transponder’s
transmission parameters and enter them in the right way. If a TP list is already showed, for starting searching press OK on the
chosen TP, changing the parameters Only FTA, Scan Channel, Network Search as on par. 4.3.4. For adding or changing a TP,
the functional keys are:
• RED key: change an existing TP
• GREEN key: add a new TP
• YELLOW key: delete the selected TP
• BLUE key: start the channel search on the selected TP
By pressing RED or GREEN key a box with the following parameters appears:
• Frequency: TP frequency
• Symbol Rate: TP symbol rate
• Polarization: select the polarity (H=horizontal, V=vertical)
Press OK on Save for saving the changes.
CAUTION
If the signal strength and quality bars at the bottom of the screen do not respond or indicate low levels, make sure the
parameters have been entered correctly and/or the selected TP is not out of date and/or the Antenna Setup menu settings
are correct and/or your antenna plant in working properly and that it is designed to receive the selected TP.
4.4 System Setup
This menu is concerned to the advanced configuration of the system. Its submenus are:
- Language
- TV System
- Display Settings
- Local Time Settings
- Timer Settings
- Parental Lock
- OSD Settings
- Other
4.4.1 Language
System Language Configuration:
• Language: OSD language
• First Audio : first audio to select in viewing channels
• Second Audio: second audio to select in viewing channels
• Subtitles: subtitles language
• Teletext: teletext language
11