Fuba
5.6 Extra features on Channels and Services
Some programs can have more features like several audio tracks and teletext. In this case, using keys AUDIO, TXT, SUB and
DISP on the remote controller you can respectively enter the following features::
• Audio: select a different audio track
• Teletext: enable teletext (press EXIT to close)
• Subtitles: enable subtitles
• TV Resolution: changing TV resolution
5.7 Timeshifting and Records
Timeshifting
If the following requirements are fulfilled:
a. being in viewing mode
b. USB device connected to receiver
c. timeshifting enabled (par. 4.7.2)
then by pressing multimedia key pause timeshifting feature starts. The first time pause key is pressed an info banner is showed
with details about the record in order to make more comfortable to move ahead/backward using fast rewind or fast forward. If no
info banner appears, wait for about 2 minutes before pressing again pause key, in order to have enough buffer in order to use
timeshifting. To exit from timeshifting press stop key on remote controller.
Recording
If the following requirements are fulfilled:
a. being in viewing mode
b. USB device connected to receiver
by pressing REC key a new record starts. The default length is 2 hours. If you want to change this value press again REC key
and inser t the new value with the numeric keyboard of the remote controller. Press stop key (or change channel to a channel in
a different TP) in order to close the record. In any case, a confirm box will be showed before close the record.
5.8 Electronic Programming Guide (EPG)
If the receiver is in viewing mode and EPG key is pressed, the Electronic Programming Guide is showed. The functional keys are:
• Keys CHº, CH», VOL¶, VOL·: moving through channels or time
• OK key: open a box with detailed info about current program on TV. If the info are available in several languages, the green
key will allow the language changing. To close the box press red key or EXIT/BACK
• RED key: it allows the movement trough time on EPG by activating a more comfortable menu. You can move by programs
or by days only by selecting the right key and pressing OK on it. To close this menu press EXIT
• GREEN key: it shows a box for reserving a program (for viewing it or recording it); the values that can be changed are the
same as the ones in par. 4.4.5.
NOTE
If green key is pressed when a TV program is selected, some timer values are already set with the value of the TV program, in
order to make easier the program reservation
The reservations can be viewed and changed by moving to main menu System Setup > Timer Setting. Press BACK or EXIT to
come back to viewing mode.
17
To Next Page
Loading...
